NetUP DVB to IP Gateway 4x
NetUP DVB to IP Gateway 4x

The DVB to IP gateway 4x is a complete IPTV streaming solution. It can r...
lees meer ›

IDM100 Integrated Digital TV Monitoring

ITNM Systems's IDM100 offers a powerful, advanced, costeffective and...
lees meer ›

VB270 DVB-S/S2 Monitoring Blade

Home › Products › Sencore Monitoring/Analyzing › VB270 DVB-S/S2 Monitoring Blade

VB270 DVB-S/S2 Monitoring Blade

The VB270 input option offers monitoring and analysis of QPSK/8PSK signals found in DVB-S and DVB-S2 satellite transponders. The chassis can be equipped with a single VB120 or VB220 IP-PROBE controller card and up to two VB270 QPSK input cards under its control.

The complete configuration with the fully licensed VB120 provides realtime monitoring and alarming for two QPSK/8PSK RF inputs, 10 IP MPTS/SPTS multicasts and one ASI TS input. ETSI TR 101 290 analysis is performed in parallel for QPSK/8PSK inputs, the ASI input and the IP input. If the VB220 is used as master card the IP monitoring capacity is increased to impressive 180 MPTS/SPTS multicasts.
The combined unit is ideal for hybrid networks where IP is used as a carrier from head-end to the satellite uplink station. The built-in round-robin functionality allows sequential analysis of multiple QPSK/8PSK multiplexes, making it possible to monitor a complete transponder using a single VB270.

Features

  • DiSEqC 2x compliant
  • DVB-S: 10-30 Msymb
  • DVB-S2: (LDPC/BHC) 10-30 Msymb
  • RF measurements: pre and post FEC BER, SNR
  • RF input - F connector
  • Analog RF carrier signal level measurement
  • Configurable round robin transponder testing
  • Fully controlled via backplane by VB120 or VB220
  • Built-in general purpose alarm relay (GPI)
  • 2 x ASI output for ad-hoc ASI connections - 75 ohm BNC
  • Technical Specifications

    RF INPUT
    F-connector, 75 ohm female

    ASI OUTPUTS
    F-connector, 75 ohm female

    ALARM RELAY
    9-pin D-SUB, male
    3-pin relay

    MECHANICAL
    Standard 19" 1RU rack-mount
    W x H x D: 19 x 1.7 x 15.75 in. (483x43x400 mm)
    Weight: 9.3lbs. (4.2 kg) fully populated

    ENVIRONMENT SPECIFICATIONS
    Operating temperature: 0°C to 50°C
    Storage temperature: -20°C to 70°C
    Operating humidity: 5% to 95% non-condensing

    CONTROL AND MANAGEMENT
    Fully controlled through backplane
    Accessible through master VB120 or VB220 user interface

    POWER SUPPLY REQUIREMENTS
    Draws power from backplane (+5V)
    Maximum 5W dissipated per card

    Zoeken

    Follow us!