MRD 3187B Modular Receiver Decoder
MRD 3187B Modular Receiver Decoder

The MRD 3187B Receiver Decoder is the industry's only professional m...
lees meer ›

Micro VB IP Edge Monitoring Probe

The microVBTM is a breakthrough in both form-factor and funct...
lees meer ›

VB12 IP Distribution Monitoring Probe

Home › Products › Sencore Monitoring/Analyzing › VB12 IP Distribution Monitoring Probe

VB12 IP Distribution Monitoring Probe

The VB12 is the most portable broadcast monitoring and measurement platform available. Featuring both optical and electrical GigE Ethernet inputs, separate management port and both ASI input and output, the VB12 has the widest range of built in interfaces in the industry.

The ability to monitor continuously 10 services with full TR 101290 alarming and analysis makes the portable VB12 invaluable for field use. Its ruggedized exterior and fanless design give engineers the perfect fault-finding tool or for permanent placement in harsh environments. With full TR 101290 alarming and all modern codecs, the VB12 is built for real-world use.

Critical parameters such as RFC4445 - MDI and detailed jitter values give accurate readings of network performance. With the RFC4445 based patented MediaWindowTM, historical data can be easily accessed for meaningful visualization of media flow in an IP network.

The power of confidence monitoring is further enhanced by continuous monitoring of TR 101290 parameters, bandwidth overflow/underflow and signal loss. With advanced threshold settings including error-seconds, alarm granularity can be set to reflect actual status.

SNMP trapping and XML export enables the IP Probes to be implemented in any NMS system (with alarm generation either directly from the probes themselves, or via the VBC server) for advanced alarm correlation and filtering.

Each VB12 runs an integral HTTP server with the client as a web browser, so no need to install custom software on computers needing access to the measurement data. Basic setup is achieved through the built-in USB to RS232 converter, eliminating the need for an external interface and facilitates setting of IP addresses for access to the VB12. The device can also be controlled remotely via TELNET or XML configuration commands.

Features

  • 1x 10/100/1000T Mbps Ethernet port
  • 1x SFP GigE port
  • 1x 10/100T Mbps Ethernet management port
  • 1x ASI Input and 1x ASI output port
  • Ruggedized chassis
  • Built-in 100-240VAC PSU
  • Built-in USB to RS232 converter
  • Concurrent analysis of 10 services
  • Monitors Transport Stream into IP according to ETSI TS 102 034
  • Supports X-bit RTP header extension as used by Microsoft IPTV system MediaRoomTM
  • Full TR 101290 alarming and analysis for 10 streams in parallel
  • Full table and descriptor parsing of PSI/SI for visual inspection
  • MDI measurements (RFC4445)
  • MediaWindowTM visualization technology
  • Line speed ASI measurements
  • NTP client functionality (RFC2030)
  • DHCP client support (RFC2131)
  • RTP dropped, duplicate and out of-order measurements
  • RDPTM of IP multicasts monitored
  • RDPTM of ASI input (MPTS or SPTS)
  • Built-in web-based management
  • Optional central management via VBC Server
  • Technical Specifications

    ENVIRONMENT SPECIFICATIONS
    Operating Temperature: 0°C to 45°C
    Storage Temperature: -20°C to 70°C
    Operating Humidity: 5% to 95% non-condensing

    CONNECTOR SPECIFICATIONS
    10/100/1000T GigE input: RJ-45
    10/100T Ethernet management: RJ-45
    Optical input: SFP Module
    ASI input: 75 ohms BNC
    ASI output: 75 ohms BNC
    Serial port: USB Type A connector
    AC power: IEC 320 connector

    POWER SUPPLY REQUIREMENTS
    Input voltage: 100 to 240V AC
    Power required: 20 VA
    Power dissipated: maximum 13W

    NETWORK SPECIFICATIONS
    10/100/1000 BASE-T Ethernet (802.3u and 802.3ab)
    SFP interface for optical networks
    10/100 BASE-TX Ethernet management (802.3u)

    MECHANICAL SPECIFICATIONS
    W x H x D: 4.5 x 1.6 x 13.2 in. (114 x 41 x 335mm)
    Weight: 3.3 lbs (1.5 kg)

    ADVANCED ETHERNET TOOLS OPTION FUNCTIONALITY
    FSMTM monitoring of middleware services
    IGMP monitoring and logging
    Advanced real-time IP protocol breakdown and analysis, with individual bandwidth and frame size displaying

    ADDITIONAL ETSI TR 101 290 MONITORING ENGINE OPTION
    Full real-time ETSI TR 101 290 alarming and analysis (Pri 1, 2, 3) for additional Ethernet transport streams

    ADDITIONAL IP-STREAMS (UP TO 50)
    Full real-time Real-time monitoring of IP multicasts/unicasts, can be upgraded to support 50 transport streams in parallel

    DVB-T2 ENCAPSULATION MONITORING OPTION
    T2-MI encapsulation breakdown and analysis
    ETSI TR 101 290 analysis of outer and inner streams

    TRAFFIC MODULE OPTION
    Detailed traffic protocol breakdown
    Traffic graphing

    Zoeken

    Follow us!