RD-60 SD & HD MP2 and MP4 DSNG IRD
RD-60 SD & HD MP2 and MP4 DSNG IRD

The RD-60 integrated receiver decoder (IRD) supports MPEG 2 and MPEG 4 A...
lees meer ›

NetUP IPTV Complex
NetUP IPTV Complex

IPTV Complex is a set of IPTV software and hardware that forms a scalabl...
lees meer ›

Home › Products › Adtec Contribution/SNG Products

EN-91P 1080P Encoder

EN-91P 1080P Encoder

The EN91P is a ultra-low delay 1080P MPEG 4 AVC/H.264 high definition encoder. The ultra-low delay mode requires the use of Adtec's RD70 IRD and delivers picture-to-picture services in 100 milliseconds; The EN91P standard delay mode is fully interoperable with other IRDs making it ideal for mission critical trunking and ad-hoc applications. MPEG 4 AVC/H.264 is significantly more efficient than JPEG making it the CODEC of choice for multiplexed and bandwidth sensitive applications; AVCs inherent interoperability significantly adds to the value of solutions based on this industry standard.

The lightweight, 10 pound or 4.5 Kilo EN91P offers amazing features and specifications in its 1 RU chassis, including redundant AC power supplies, enhanced control and monitoring via its front-panel, a browser and SNMP; video support includes SD, 2D-HD and 3D AVC 422, sixteen channels of phase aligned audio, robust VBI support, reliability and easy of use all for an extraordinary value. In addition to encoding phase aligned audio, the EN91P pass-through support includes PCM, DolbyE (16 and 20 Bit) and Dolby AC3 (2.0 and 5.1).

The EN91P encodes and concurrently transports services via ASI, IP and DVBS/S2. The DVBS/S2 modulator is available in IF or L-band with modulation modes ranging from QPSK up to 32APSK based on software licenses.

DTA-3050

DTA-305010-input Digital Turn Around with IP and ASI Outputs
Digital television service operators wishing to aggregate and process MPEG, ATSC, Digicypher, or DVB based services for traditional (satellite, cable, terrestrial) services will find the DTA ideal.

It boasts 10 ASI inputs. Each supporting wire speed, a three-way mirrored ASI output, GIGE, and optional SMPTE-310. Redundancy for ASI and SMPTE-310 is supported with an intelligent built in relay-bypassed switch.

The DTA-3050 is IPTV and BBTV ready today, it supports multicast and unicast configurations including SPTS/UDP, MPTS/UPD, MPEG and DVB tables.

Encryption support includes DVB-CSA with Ethernet Simylcrypt, AES for use with Simylcrypt compatible Conditional Access management Servers (CAS) vendors.

The DTA 3050 is ideal for traditional and next generation television networks.

QUARTET

QUARTET

The Quartet is a 3G Ready ASI & HD/SD-SDI Switching Distribution Amplifier. It is Ideal for supporting encoder redundancy without a DTA. The Quartet features automatic or manual switching with automatic rate detection.

EN-80/81 HD and SD MPEG4 & MPEG2 DSNG Encoder

EN-80/81 HD and SD MPEG4 & MPEG2 DSNG Encoder

Designed specifically for Tier 1 Satellite, ASI/Fiber and IP Contribution and DSNG applications, Adtec's fifth generation encoder enters the market with an impressive list of standard features and a wide range of options; allowing you minimal initial investment and an upgrade path for future applications. Offering High and Standard Definition, MPEG 2 and MPEG 4 AVC encoding, the EN-80 series continues to support past, present and future
requirements. With temporal and spatial filtering for Standard Definition and advanced motion compensated temporal filtering for High Definition, the EN-80 Series exhibits the highest-quality video picture. Audio encoding highlights include up to 8 pairs of audio encoding and advanced audio mapping capabilities.

Designed for mobility and durability, the EN Series sports a new front panel design with an expanded menu system and additional key pad options, making configuration and statusing quick and easy. Additional methods of control and configuration are available via our on-board web-based application and SNMP.

RD-60 SD & HD MP2 and MP4 DSNG IRD

RD-60 SD & HD MP2 and MP4 DSNG IRD

The RD-60 integrated receiver decoder (IRD) supports MPEG 2 and MPEG 4 AVC/H.264 platforms with 420 and 422 high and standard definition decoding. The RD-60 decodes both MPEG 2 and MPEG 4 AVC/H.264 video with 4:2:0 and 4:2:2 chroma sampling.

It boasts four pairs of stereo audio including MPEG 1 Layer 2, Dolby AC3/5.1, HE-AAC, AAC-LC audio decoding. Passthrough support includes PCM, DolbyE/2.0/5.1 and Linear Acoustic Stream Stacker. The RD-60 supports redundant AC or DC dual-power supplies, enhanced control and monitoring via SNMP and browser.

Standard inputs include IP and ASI with optional dual DVBS/S2 tuner demodulator supporting Q/8PSK. An optional high end Newtec DVBS/S2 tuner demodulator supporting QPSK up to 32APSK is available.

EN-40 SD MPEG2 and MPEG4 DSNG Encoder

EN-40 SD MPEG2 and MPEG4 DSNG EncoderThe EN-40 DSNG encoder/modulator supports standard definition MPEG 2 and MPEG 4 AVC/H.264 with 420 and 422 encoding. The EN-40 encodes both MPEG 2 and MPEG 4 AVC/H.264 video with 4:2:0 and 4:2:2 chroma sampling.

It boasts four pairs of stereo audio including MPEG 1 Layer 2 and Dolby AC3 audio encoding. Passthrough support includes PCM, DolbyE/2.0/5.1 and Linear Acoustic Stream Stacker.

The EN-40 supports redundant AC or DC dual-power supplies, enhanced control and monitoring via SNMP and browser. The EN-40 allows concurrent encoding and streaming to IP, ASI and L-Band. The optional Newtec DVBS/S2 modulator supports modulation from QPSK up to 32APSK.
Zoeken

Follow us!